[性 質]
外 觀:乳白色液體
主成分:特殊樹脂
離子性:陰離子
含固量: 40%
[保質期] 室溫5-35℃,避免暴曬或受凍,一般可貯存1年。
1)易調色,色澤鮮艷飽滿。
2)牢度特好,耐水性特強,手感較柔軟,流動性好,覆蓋力強,花形輪廓清晰。
3)耐黃變(高溫下不易泛黃變色)。平整度好。
4)環保指數達國際環?椢镆。
5)手搓輕微泛白,水洗后手感柔軟,干濕摩擦牢度好,干擦4級,濕擦3級,摩擦有輕微痕跡
[應 用]滾筒、圓網、平網、手工印花和噴花多種工藝。
[操作工藝]
漿料+色漿+固色劑,根據實際情況調整(Mesh網布80-120目)印花→干燥
有條件:烘干、熱處理(130-150℃,3-5分鐘)效果更好。
[注意事項] 每批次貨/每次使用前,必須認真試驗,確認后方可使用。
1)選擇合適的固色劑可以提高印花面的色牢度與摩擦牢度(注意固色劑的時效性) ,避免使用陽離子色漿和助劑。
2)干透后再進行熱處理,可以增加牢度。24-48小時后,方可測試?yán)味取?/span>
Otherdetailedinformation
Brand |
CongHui |
Model |
CH300 |
viscosity |
300-600PS |
PHvalue |
7-8 |
Odour |
|
Elasticity |
T |
Fineness |
um |
Appearance |
Milkywhiteliquid |
usage |
|
Colorstrength |
% |
Fluidity≥ |
mm |
Shelflife |
6months |
Singlenetweight |
50kg120kg |
Resintype |
|
Ionicperformance |
anion |
Appearancecolor |
|
[Features]
Appearance:milkywhiteliquid
Maincomponent:specialresin
Ionic:anion
Solidcontent:50percent
[shelflife]5-35℃atroomtemperature,avoidexposureorfreeze,canbestoredforoneyear.
1)easytoadjustcolor,brilliant
2)Goodfastnesstofabrics,washproperty,softhandfellandgoodfluidity,coveringpower,clearprofiles.
3)Resistancetoyellowing(withoutyellowingathightemperature),flatsurface
4)Environmentalindicatorsreachthestandardofinternationalenvironmentalgroup.
5)After hand rubbing,it becomes slightly white,super soft hand feel after washing,excellent of wet and dry rub,the dry rub is 4 degree,the wet rub is 3 degree.By the
way, it has slight marks of friction.
[Application]roller,cylinder,flatscreen,handcraftprintingandspray.
[Operationprocess]
Slurry+paste+fixingagents,adjustedaccordingtorealsituation(80-120meshscreen)printing→drying
Condition:bakeandheattreasure(130-150℃,3-5minitues)betterresult.
[Note]everybatchofproduct/beforeeveryonceused,mustmakecarefultestandusedafterdetermined.
1.choosingsuitablefixingagentcanimprovefastnessofcolorandabrasion(noticethetimelinessoffixingagent),avoidusingcatatonicpasteandadditives
2.Makingheatpressureafterdryingtoimprovefastness.Havingtestaboutfastnessafter24-48hours.